| Class | arakawa_schubert_L1982 |
| In: |
cumulus/arakawa_schubert_L1982.f90
|
Note that Japanese and English are described in parallel.
Lord et al. (1982) による Arakawa-Schubert scheme の実装.
Implementation of Arakawa-Schubert scheme by Lord et al. (1982).
Lord, S. J., W. C. Chao, and A. Arakawa, Interaction of a cumulus cloud ensemble with the large-scale environment. Part IV: The discrete model, J. Atmos. Sci., 39, 104-113, 1982.
ArakawaSchubertL1982CalcCWFCrtl ::
| ——————————- : | ———— |
| ArakawaSchubertL1982CalcCWFCrtl : | Set critical value of cloud work function presented by Lord et al. (1982) |
| Subroutine : | |||
| PressCldBase : | real(DP), intent(in )
| ||
| z_PressCldTop(1:kmax) : | real(DP), intent(in )
| ||
| z_CWFCrtl(1:kmax) : | real(DP), intent(out)
|
Calculate critical cloud work function by using interpolation of Table 1 by Lord et al. (1982)
subroutine ASL1982CalcCWFCrtl1D( PressCldBase, z_PressCldTop, z_CWFCrtl )
!
!
!
! Calculate critical cloud work function by using interpolation of Table 1
! by Lord et al. (1982)
!
! モジュール引用 ; USE statements
!
! 宣言文 ; Declaration statements
!
implicit none
real(DP), intent(in ) :: PressCldBase
! pressure at cloud base
real(DP), intent(in ) :: z_PressCldTop (1:kmax)
! pressure at cloud top
real(DP), intent(out) :: z_CWFCrtl (1:kmax)
! critical cloud work function
! 作業変数
! Work variables
!
integer :: z_Index (1:kmax)
real(DP) :: z_CWFIntpled(1:kmax)
integer :: k ! 鉛直方向に回る DO ループ用作業変数
! Work variables for DO loop in vertical direction
integer :: l
! 実行文 ; Executable statement
!
! 初期化確認
! Initialization check
!
if ( .not. arakawa_schubert_L1982_inited ) then
call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
end if
do k = 1, kmax
z_Index(k) = 1
loop_search : do l = 2, nTbl1-1
if ( a_Tbl1Press(l) < z_PressCldTop(k) ) then
z_Index(k) = l
end if
end do loop_search
end do
do k = 1, kmax
z_CWFIntpled(k) = ( a_Tbl1CWF (z_Index(k)+1) - a_Tbl1CWF (z_Index(k)) ) / ( a_Tbl1Press(z_Index(k)+1) - a_Tbl1Press(z_Index(k)) ) * ( z_PressCldTop(k) - a_Tbl1Press(z_Index(k)) ) + a_Tbl1CWF(z_Index(k))
end do
do k = 1, kmax
z_CWFCrtl(k) = z_CWFIntpled(k) * ( PressCldBase - z_PressCldTop(k) )
end do
end subroutine ASL1982CalcCWFCrtl1D
| Subroutine : | |||
| xy_PressCldBase(0:imax-1, 1:jmax) : | real(DP), intent(in )
| ||
| xyz_PressCldTop(0:imax-1, 1:jmax, 1:kmax) : | real(DP), intent(in )
| ||
| xyz_CWFCrtl(0:imax-1, 1:jmax, 1:kmax) : | real(DP), intent(out)
|
Calculate critical cloud work function by using interpolation of Table 1 by Lord et al. (1982)
subroutine ArakawaSchubertL1982CalcCWFCrtl( xy_PressCldBase, xyz_PressCldTop, xyz_CWFCrtl )
!
!
!
! Calculate critical cloud work function by using interpolation of Table 1
! by Lord et al. (1982)
!
! モジュール引用 ; USE statements
!
! 宣言文 ; Declaration statements
!
implicit none
real(DP), intent(in ) :: xy_PressCldBase (0:imax-1, 1:jmax)
! pressure at cloud base
real(DP), intent(in ) :: xyz_PressCldTop (0:imax-1, 1:jmax, 1:kmax)
! pressure at cloud top
real(DP), intent(out) :: xyz_CWFCrtl (0:imax-1, 1:jmax, 1:kmax)
! critical cloud work function
! 作業変数
! Work variables
!
integer :: xyz_Index (0:imax-1, 1:jmax, 1:kmax)
real(DP) :: xyz_CWFIntpled(0:imax-1, 1:jmax, 1:kmax)
integer :: i ! 経度方向に回る DO ループ用作業変数
! Work variables for DO loop in longitude
integer :: j ! 緯度方向に回る DO ループ用作業変数
! Work variables for DO loop in latitude
integer :: k ! 鉛直方向に回る DO ループ用作業変数
! Work variables for DO loop in vertical direction
integer :: l
! 実行文 ; Executable statement
!
! 初期化確認
! Initialization check
!
if ( .not. arakawa_schubert_L1982_inited ) then
call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
end if
do k = 1, kmax
do j = 1, jmax
do i = 0, imax-1
xyz_Index(i,j,k) = 1
loop_search : do l = 2, nTbl1-1
if ( a_Tbl1Press(l) < xyz_PressCldTop(i,j,k) ) then
xyz_Index(i,j,k) = l
end if
end do loop_search
end do
end do
end do
do k = 1, kmax
do j = 1, jmax
do i = 0, imax-1
xyz_CWFIntpled(i,j,k) = ( a_Tbl1CWF (xyz_Index(i,j,k)+1) - a_Tbl1CWF (xyz_Index(i,j,k)) ) / ( a_Tbl1Press(xyz_Index(i,j,k)+1) - a_Tbl1Press(xyz_Index(i,j,k)) ) * ( xyz_PressCldTop(i,j,k) - a_Tbl1Press(xyz_Index(i,j,k)) ) + a_Tbl1CWF(xyz_Index(i,j,k))
end do
end do
end do
do k = 1, kmax
xyz_CWFCrtl(:,:,k) = xyz_CWFIntpled(:,:,k) * ( xy_PressCldBase - xyz_PressCldTop(:,:,k) )
end do
end subroutine ArakawaSchubertL1982CalcCWFCrtl
| Subroutine : |
arakawa_schubert_L1982 モジュールの初期化を行います. NAMELIST#arakawa_schubert_L1982_nml の読み込みはこの手続きで行われます.
"arakawa_schubert_L1982" module is initialized. "NAMELIST#arakawa_schubert_L1982_nml" is loaded in this procedure.
subroutine ArakawaSchubertL1982Init
!
! arakawa_schubert_L1982 モジュールの初期化を行います.
! NAMELIST#arakawa_schubert_L1982_nml の読み込みはこの手続きで行われます.
!
! "arakawa_schubert_L1982" module is initialized.
! "NAMELIST#arakawa_schubert_L1982_nml" is loaded in this procedure.
!
! モジュール引用 ; USE statements
!
! NAMELIST ファイル入力に関するユーティリティ
! Utilities for NAMELIST file input
!
use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid
! ファイル入出力補助
! File I/O support
!
use dc_iounit, only: FileOpen
! 宣言文 ; Declaration statements
!
implicit none
!!$ integer:: unit_nml ! NAMELIST ファイルオープン用装置番号.
!!$ ! Unit number for NAMELIST file open
!!$ integer:: iostat_nml ! NAMELIST 読み込み時の IOSTAT.
!!$ ! IOSTAT of NAMELIST read
! NAMELIST 変数群
! NAMELIST group name
!
!!$ namelist /arakawa_schubert_L1982_nml/ &
!!$ &
! デフォルト値については初期化手続 "arakawa_schubert_L1982#CumAdjInit"
! のソースコードを参照のこと.
!
! Refer to source codes in the initialization procedure
! "arakawa_schubert_L1982#ArakawaSchubertL1982Init" for the default values.
!
! 実行文 ; Executable statement
!
if ( arakawa_schubert_L1982_inited ) return
! デフォルト値の設定
! Default values settings
!
! NAMELIST の読み込み
! NAMELIST is input
!
!!$ if ( trim(namelist_filename) /= '' ) then
!!$ call FileOpen( unit_nml, & ! (out)
!!$ & namelist_filename, mode = 'r' ) ! (in)
!!$
!!$ rewind( unit_nml )
!!$ read( unit_nml, & ! (in)
!!$ & nml = moist_conv_adjust_nml, & ! (out)
!!$ & iostat = iostat_nml ) ! (out)
!!$ close( unit_nml )
!!$
!!$ call NmlutilMsg( iostat_nml, module_name ) ! (in)
!!$ end if
! 印字 ; Print
!
call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
call MessageNotify( 'M', module_name, '' )
call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )
arakawa_schubert_L1982_inited = .true.
end subroutine ArakawaSchubertL1982Init
| Variable : | |||
| arakawa_schubert_L1982_inited = .false. : | logical, save
|
| Constant : | |||
| module_name = ‘arakawa_schubert_L1982‘ : | character(*), parameter
|
| Constant : | |||
| version = ’$Name: dcpam5-20150213 $’ // ’$Id: arakawa_schubert_L1982.f90,v 1.2 2014/02/04 10:24:42 yot Exp $’ : | character(*), parameter
|