鉛直拡散フラックス (Mellor and Yamada, 1974, 1982)

Vertical diffusion flux (Mellor and Yamada, 1974, 1982)

Note that Japanese and English are described in parallel.

鉛直拡散フラックスを計算します.

Vertical diffusion flux is calculated.

Procedures List

VDiffusion :	鉛直拡散フラックスの計算
VDiffusionOutPut :	フラックスの出力
———— :	————
VDiffusion :	Calculate vertical diffusion fluxes
VDiffusionOutPut :	Output fluxes

NAMELIST

NAMELIST#vdiffusion_my_nml

Methods

LevelNum VDiffusionJMAInit VDiffusionJMAMYWrapper3D module_name vdiffusion_jma_my_wrap_inited version

Included Modules

gridset composition dc_types dc_message constants timeset gtool_historyauto pbl_grid pbl_mym_main namelist_util dc_iounit dc_string auxiliary pp_phys_const pbl_mym_option_symbol pbl_const pbl_parm pbl_mym_option pbl_mym_parm pbl_mym_const axesset

Public Instance methods

VDiffusionJMAInit( )

Subroutine :

vdiffusion_my モジュールの初期化を行います. NAMELIST#vdiffusion_my_nml の読み込みはこの手続きで行われます.

"vdiffusion_my" module is initialized. "NAMELIST#vdiffusion_my_nml" is loaded in this procedure.

[Source]

  subroutine VDiffusionJMAInit
    !
    ! vdiffusion_my モジュールの初期化を行います. 
    ! NAMELIST#vdiffusion_my_nml の読み込みはこの手続きで行われます. 
    !
    ! "vdiffusion_my" module is initialized. 
    ! "NAMELIST#vdiffusion_my_nml" is loaded in this procedure. 
    !

    ! モジュール引用 ; USE statements
    !

    ! NAMELIST ファイル入力に関するユーティリティ
    ! Utilities for NAMELIST file input
    !
    use namelist_util, only: namelist_filename, NmlutilMsg, NmlutilAryValid

    ! ファイル入出力補助
    ! File I/O support
    !
    use dc_iounit, only: FileOpen

    ! 種別型パラメタ
    ! Kind type parameter
    !
    use dc_types, only: STDOUT ! 標準出力の装置番号. Unit number of standard output

    ! 文字列操作
    ! Character handling
    !
    use dc_string, only: StoA

    ! 時刻管理
    ! Time control
    !
    use timeset, only: DelTime            ! $ \Delta t $ [s]

    ! ヒストリデータ出力
    ! History data output
    !
    use gtool_historyauto, only: HistoryAutoAddVariable

    ! 補助的な変数を計算するサブルーチン・関数群
    ! Subroutines and functions for calculating auxiliary variables
    !
    use auxiliary, only : RefPressForPotTemp => RefPress, AuxVarsInit

#ifdef JMAVDIFF
    !
    ! JMA library
    !
    use pp_phys_const, only: pp_phys_const_set
    use pbl_mym_option_symbol, only: mymodel25, mymodel3
    use pbl_grid, only: pbl_grid_ini
    use pbl_const, only: pbl_const_ini
    use pbl_parm, only: pbl_parm_ini
    use pbl_mym_option, only: pbl_mym_option_ini
    use pbl_mym_parm, only: pbl_mym_parm_ini
    use pbl_mym_const, only: pbl_mym_const_ini
#endif

    ! 座標データ設定
    ! Axes data settings
    !
    use axesset, only: AxnameX, AxnameY, AxnameZ, AxnameR, AxnameT

    ! 宣言文 ; Declaration statements
    !
    implicit none

    real(DP) :: PressRef
    real(DP) :: TimeStep
    real(DP) :: SurfEmis

    integer:: unit_nml        ! NAMELIST ファイルオープン用装置番号. 
                              ! Unit number for NAMELIST file open
    integer:: iostat_nml      ! NAMELIST 読み込み時の IOSTAT. 
                              ! IOSTAT of NAMELIST read

    ! NAMELIST 変数群
    ! NAMELIST group name
    !
!!$    namelist /vdiffusion_my_nml/        &
!!$      & FlagConstDiffCoef,              &
!!$      & ConstDiffCoefM, ConstDiffCoefH, &
!!$!
!!$      & SquareVelMin, BulkRiNumMin,     &
!!$!
!!$      & MixLengthMax, ShMin, SmMin,      &
!!$      & VelDiffCoefMin, TempDiffCoefMin, &
!!$      & VelDiffCoefMax, TempDiffCoefMax, &
!!$!
!!$      & MYConstA1, MYConstB1, MYConstA2, MYConstB2, MYConstC1
          !
          ! デフォルト値については初期化手続 "vdiffusion_my#VDiffInit" 
          ! のソースコードを参照のこと. 
          !
          ! Refer to source codes in the initialization procedure
          ! "vdiffusion_my#VDiffInit" for the default values. 
          !

    ! 実行文 ; Executable statement
    !

    if ( vdiffusion_jma_my_wrap_inited ) return


    ! デフォルト値の設定
    ! Default values settings
    !
!!$    FlagConstDiffCoef = .false.
!!$    ConstDiffCoefM    = 0.0_DP
!!$    ConstDiffCoefH    = 0.0_DP
!!$
!!$    SquareVelMin    =     0.1_DP
!!$    BulkRiNumMin    = - 100.0_DP
!!$
!!$    MixLengthMax    = 300.0_DP
!!$    ShMin           =   0.0_DP
!!$    SmMin           =   0.0_DP
!!$    VelDiffCoefMin  =   0.1_DP
!!$    TempDiffCoefMin =   0.1_DP
!!$    VelDiffCoefMax  = 10000.0_DP
!!$    TempDiffCoefMax = 10000.0_DP
!!$
!!$    ! Parameters proposed by Mellor and Yamada (1982).
!!$    !
!!$    MYConstA1 =  0.92_DP
!!$    MYConstB1 = 16.6_DP
!!$    MYConstA2 =  0.74_DP
!!$    MYConstB2 = 10.1_DP
!!$    MYConstC1 =  0.08_DP


    ! NAMELIST の読み込み
    ! NAMELIST is input
    !
!!$    if ( trim(namelist_filename) /= '' ) then
!!$      call FileOpen( unit_nml, &          ! (out)
!!$        & namelist_filename, mode = 'r' ) ! (in)
!!$
!!$      rewind( unit_nml )
!!$      read( unit_nml, &                   ! (in)
!!$        & nml = vdiffusion_my_nml,     &  ! (out)
!!$        & iostat = iostat_nml )           ! (out)
!!$      close( unit_nml )
!!$
!!$      call NmlutilMsg( iostat_nml, module_name ) ! (in)
!!$      if ( iostat_nml == 0 ) write( STDOUT, nml = vdiffusion_my_nml )
!!$    end if


    ! 補助的な変数を計算するサブルーチン・関数群
    ! Subroutines and functions for calculating auxiliary variables
    !
    call AuxVarsInit


#ifdef JMAVDIFF

    PressRef = RefPressForPotTemp
    TimeStep = 2.0_DP * DelTime
    SurfEmis = 1.0_DP

    LevelNum = mymodel25

!!$    ntime = nint(itend * timestep / dt_str)
!!$    call pp_monit_ini(.true., timestep, dt_str_in = dt_str)
!!$    call pp_monit_grads_ini(1, 1, pbl_nz, ntime, dt_str, idate, z_f, 'output')

    call pp_phys_const_set

    call pbl_const_ini( PressRef, TimeStep, SurfEmis )
    call pbl_parm_ini
    call pbl_grid_ini( kmax )

    call pbl_mym_option_ini(levflag_in = LevelNum)
    call pbl_mym_parm_ini
    call pbl_mym_const_ini
#else

    call MessageNotify( 'E', module_name, 'JMA MY library is not included.' )

#endif


    ! ヒストリデータ出力のためのへの変数登録
    ! Register of variables for history data output
    !
!!$    call HistoryAutoAddVariable( 'VelDiffCoef', &
!!$      & (/ AxNameX, AxNameY, AxNameR, AxNameT /), &
!!$      & 'diffusion coef. momentum', 'm2 s-1' )
!!$    call HistoryAutoAddVariable( 'TempDiffCoef', &
!!$      & (/ AxNameX, AxNameY, AxNameR, AxNameT /), &
!!$      & 'diffusion coef. heat    ', 'm2 s-1' )
!!$    call HistoryAutoAddVariable( 'QVapDiffCoef', &
!!$      & (/ AxNameX, AxNameY, AxNameR, AxNameT /), &
!!$      & 'diffusion coef. moisture', 'm2 s-1' )
!!$
!!$    call HistoryAutoAddVariable( 'MomFluxX', &
!!$      & (/ AxNameX, AxNameY, AxNameR, AxNameT /), &
!!$      & 'eastward momentum flux', 'N m-2' )
!!$    call HistoryAutoAddVariable( 'MomFluxY', &
!!$      & (/ AxNameX, AxNameY, AxNameR, AxNameT /), &
!!$      & 'northward momentum flux', 'N m-2' )
!!$    call HistoryAutoAddVariable( 'HeatFlux', &
!!$      & (/ AxNameX, AxNameY, AxNameR, AxNameT /), &
!!$      & 'heat flux', 'W m-2' )
!!$    call HistoryAutoAddVariable( 'QVapFlux', &
!!$      & (/ AxNameX, AxNameY, AxNameR, AxNameT /), &
!!$      & 'moisture flux', 'W m-2' )
!!$
!!$    call HistoryAutoAddVariable( 'DUDtVDiff', &
!!$      & (/ AxNameX, AxNameY, AxNameZ, AxNameT /), &
!!$      & 'tendency of zonal wind by vertical diffusion', 'm s-2' )
!!$    call HistoryAutoAddVariable( 'DVDtVDiff', &
!!$      & (/ AxNameX, AxNameY, AxNameZ, AxNameT /), &
!!$      & 'tendency of meridional wind by vertical diffusion', 'm s-2' )
!!$    call HistoryAutoAddVariable( 'DTempDtVDiff', &
!!$      & (/ AxNameX, AxNameY, AxNameZ, AxNameT /), &
!!$      & 'tendency of temperature by vertical diffusion', 'K s-1' )
!!$    call HistoryAutoAddVariable( 'DQVapDtVDiff', &
!!$      & (/ AxNameX, AxNameY, AxNameZ, AxNameT /), &
!!$      & 'tendency of specific humidity by vertical diffusion', 's-1' )
!!$
!!$    call HistoryAutoAddVariable( 'TurKinEne', &
!!$      & (/ AxNameX, AxNameY, AxNameR, AxNameT /), &
!!$      & 'turbulent kinetic energy', 'm2 s-2' )
!!$
!!$    call HistoryAutoAddVariable( 'TKEPShear',  &
!!$      & (/ AxNameX, AxNameY, AxNameZ, AxNameT /), &
!!$      & 'turbulent kinetic energy production rate by shear', 'm2 s-3' )
!!$    call HistoryAutoAddVariable( 'TKEPBuoy',   &
!!$      & (/ AxNameX, AxNameY, AxNameZ, AxNameT /), &
!!$      & 'turbulent kinetic energy production rate by buoyancy', 'm2 s-3' )
!!$    call HistoryAutoAddVariable( 'TKEDiss',    &
!!$      & (/ AxNameX, AxNameY, AxNameZ, AxNameT /), &
!!$      & 'turbulent kinetic energy dissipation rate', 'm2 s-3' )
!!$    call HistoryAutoAddVariable( 'MixLength',  &
!!$      & (/ AxNameX, AxNameY, AxNameZ, AxNameT /), &
!!$      & 'mixing length', 'm' )

    ! 印字 ; Print
    !
    call MessageNotify( 'M', module_name, '----- Initialization Messages -----' )
#ifdef JMAVDIFF
    call MessageNotify( 'M', module_name, 'Level MY2.5: %d, MY3: %d', i = (/ mymodel25, mymodel3 /) )
#endif
    call MessageNotify( 'M', module_name, '  %d is specified.', i = (/ LevelNum /) )
!!$    call MessageNotify( 'M', module_name, 'For vertical diffusion flux:' )
!!$    call MessageNotify( 'M', module_name, '  FlagConstDiffCoef = %b', l = (/ FlagConstDiffCoef /) )
!!$    call MessageNotify( 'M', module_name, '  ConstDiffCoefM    = %f', d = (/ ConstDiffCoefM /) )
!!$    call MessageNotify( 'M', module_name, '  ConstDiffCoefH    = %f', d = (/ ConstDiffCoefH /) )
!!$    call MessageNotify( 'M', module_name, '  SquareVelMin = %f', d = (/ SquareVelMin /) )
!!$    call MessageNotify( 'M', module_name, '  BulkRiNumMin = %f', d = (/ BulkRiNumMin /) )
!!$    call MessageNotify( 'M', module_name, 'For diffusion coefficients:' )
!!$    call MessageNotify( 'M', module_name, '  MixLengthMax      = %f', d = (/ MixLengthMax     /) )
!!$    call MessageNotify( 'M', module_name, '  ShMin             = %f', d = (/ ShMin       /) )
!!$    call MessageNotify( 'M', module_name, '  SmMin             = %f', d = (/ SmMin       /) )
!!$    call MessageNotify( 'M', module_name, '  VelDiffCoefMin    = %f', d = (/ VelDiffCoefMin  /) )
!!$    call MessageNotify( 'M', module_name, '  TempDiffCoefMin   = %f', d = (/ TempDiffCoefMin /) )
!!$    call MessageNotify( 'M', module_name, '  VelDiffCoefMax    = %f', d = (/ VelDiffCoefMax  /) )
!!$    call MessageNotify( 'M', module_name, '  TempDiffCoefMax   = %f', d = (/ TempDiffCoefMax /) )
!!$    call MessageNotify( 'M', module_name, '  MYConstA1         = %f', d = (/ MYConstA1     /) )
!!$    call MessageNotify( 'M', module_name, '  MYConstB1         = %f', d = (/ MYConstB1     /) )
!!$    call MessageNotify( 'M', module_name, '  MYConstA2         = %f', d = (/ MYConstA2     /) )
!!$    call MessageNotify( 'M', module_name, '  MYConstB2         = %f', d = (/ MYConstB2     /) )
!!$    call MessageNotify( 'M', module_name, '  MYConstC1         = %f', d = (/ MYConstC1     /) )
    call MessageNotify( 'M', module_name, '-- version = %c', c1 = trim(version) )

    vdiffusion_jma_my_wrap_inited = .true.

  end subroutine VDiffusionJMAInit

VDiffusionJMAMYWrapper3D( xyz_U, xyz_V, xyzf_QMix, xyz_Temp, xyr_Temp, xyz_VirTemp, xyr_VirTemp, xyz_Press, xyr_Press, xy_SurfHeight, xyz_Height, xyr_Height, xyz_Exner, xyr_Exner, xy_SurfMOLength, xyz_TurKinEne, xy_SurfMomFluxX, xy_SurfMomFluxY, xy_SurfHeatFlux, xyf_SurfQMixFlux, xyr_MomFluxX, xyr_MomFluxY, xyr_HeatFlux, xyrf_QMixFlux, xyr_VelDiffCoef, xyr_TempDiffCoef, xyr_QMixDiffCoef, xyz_DTurKinEneDt )

Subroutine :

xyz_U(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(in)

:	$ u $ . 東西風速. Eastward wind

xyz_V(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(in)

:	$ v $ . 南北風速. Northward wind

xyzf_QMix(0:imax-1, 1:jmax, 1:kmax, 1:ncmax) :

real(DP), intent(in)

:	$ q $ . 質量混合比. Mass mixing ratio

xyz_Temp(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(in)

:	$ T $ . 温度. Temperature

xyr_Temp(0:imax-1, 1:jmax, 0:kmax) :

real(DP), intent(in)

:	$ hat{T} $ . 温度 (半整数レベル). Temperature (half level)

xyz_VirTemp(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(in)

:	$ T_v $ . 仮温度. Virtual temperature

xyr_VirTemp(0:imax-1, 1:jmax, 0:kmax) :

real(DP), intent(in)

:	$ hat{T}_v $ . 仮温度 (半整数レベル). Virtual temperature (half level)

xyz_Press(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(in)

:	$ p $ . 気圧 (整数レベル). Air pressure (full level)

xyr_Press(0:imax-1, 1:jmax, 0:kmax) :

real(DP), intent(in)

:	$ hat{p} $ . 気圧 (半整数レベル). Air pressure (half level)

xy_SurfHeight(0:imax-1,1:jmax) :

real(DP), intent(in)

:	$ z_s $ . 地表面高度. Surface height.

xyz_Height(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(in)

:	高度 (整数レベル). Height (full level)

xyr_Height(0:imax-1, 1:jmax, 0:kmax) :

real(DP), intent(in)

:	高度 (半整数レベル). Height (half level)

xyz_Exner(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(in)

:	Exner 関数 (整数レベル). Exner function (full level)

xyr_Exner(0:imax-1, 1:jmax, 0:kmax) :

real(DP), intent(in)

:	Exner 関数 (半整数レベル). Exner function (half level)

xy_SurfMOLength(0:imax-1, 1:jmax) :

real(DP), intent(in)

:	Turbulent kinetic energy (m2 s-2)

xyz_TurKinEne(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(in)

:	Turbulent kinetic energy (m2 s-2)

xy_SurfMomFluxX(0:imax-1, 1:jmax) :

real(DP), intent(in)

:	Eastward momentum flux at surface

xy_SurfMomFluxY(0:imax-1, 1:jmax) :

real(DP), intent(in)

:	Northward momentum flux at surface

xy_SurfHeatFlux(0:imax-1, 1:jmax) : real(DP), intent(in)

xyf_SurfQMixFlux(0:imax-1, 1:jmax, 1:ncmax) : real(DP), intent(in)

xyr_MomFluxX(0:imax-1, 1:jmax, 0:kmax) :

real(DP), intent(out)

:	東西方向運動量フラックス. Eastward momentum flux

xyr_MomFluxY(0:imax-1, 1:jmax, 0:kmax) :

real(DP), intent(out)

:	南北方向運動量フラックス. Northward momentum flux

xyr_HeatFlux(0:imax-1, 1:jmax, 0:kmax) :

real(DP), intent(out)

:	熱フラックス. Heat flux

xyrf_QMixFlux(0:imax-1, 1:jmax, 0:kmax, 1:ncmax) :

real(DP), intent(out)

:	質量フラックス. Mass flux of compositions

xyr_VelDiffCoef(0:imax-1, 1:jmax, 0:kmax) :

real(DP), intent(out)

:	拡散係数：運動量. Diffusion coefficient: velocity

xyr_TempDiffCoef(0:imax-1, 1:jmax, 0:kmax) :

real(DP), intent(out)

:	拡散係数：温度. Diffusion coefficient: temperature

xyr_QMixDiffCoef(0:imax-1, 1:jmax, 0:kmax) :

real(DP), intent(out)

:	拡散係数：比湿. Diffusion coefficient: specific humidity

xyz_DTurKinEneDt(0:imax-1, 1:jmax, 1:kmax) :

real(DP), intent(out)

:	Tendency of turbulent kinetic energy

鉛直拡散フラックスを計算します.

Vertical diffusion flux is calculated by use of MY2.5 model.

[Source]

  subroutine VDiffusionJMAMYWrapper3D( xyz_U, xyz_V, xyzf_QMix, xyz_Temp, xyr_Temp, xyz_VirTemp, xyr_VirTemp, xyz_Press, xyr_Press, xy_SurfHeight, xyz_Height, xyr_Height, xyz_Exner, xyr_Exner, xy_SurfMOLength, xyz_TurKinEne, xy_SurfMomFluxX, xy_SurfMomFluxY, xy_SurfHeatFlux, xyf_SurfQMixFlux, xyr_MomFluxX,  xyr_MomFluxY,  xyr_HeatFlux, xyrf_QMixFlux, xyr_VelDiffCoef, xyr_TempDiffCoef, xyr_QMixDiffCoef, xyz_DTurKinEneDt )
    !
    ! 鉛直拡散フラックスを計算します. 
    !
    ! Vertical diffusion flux is calculated by use of MY2.5 model.
    !

    ! モジュール引用 ; USE statements
    !

    ! 物理定数設定
    ! Physical constants settings
    !
    use constants, only: GasRDry, CpDry
                              ! $ C_p $ [J kg-1 K-1].
                              ! 乾燥大気の定圧比熱.
                              ! Specific heat of air at constant pressure

    ! 時刻管理
    ! Time control
    !
    use timeset, only: DelTime, TimeN, TimesetClockStart, TimesetClockStop

    ! ヒストリデータ出力
    ! History data output
    !
    use gtool_historyauto, only: HistoryAutoPut

#ifdef JMAVDIFF
    !
    ! JMA library
    !
    use pbl_grid, only: pbl_grid_set
    use pbl_mym_main, only: pbl_mym_main_level25
#endif

    ! 宣言文 ; Declaration statements
    !
    implicit none

    real(DP), intent(in):: xyz_U (0:imax-1, 1:jmax, 1:kmax)
                              ! $ u $ .   東西風速. Eastward wind
    real(DP), intent(in):: xyz_V (0:imax-1, 1:jmax, 1:kmax)
                              ! $ v $ .   南北風速. Northward wind
    real(DP), intent(in):: xyzf_QMix(0:imax-1, 1:jmax, 1:kmax, 1:ncmax)
                              ! $ q $ .   質量混合比. Mass mixing ratio
    real(DP), intent(in):: xyz_Temp (0:imax-1, 1:jmax, 1:kmax)
                              ! $ T $ .   温度. Temperature
    real(DP), intent(in):: xyr_Temp (0:imax-1, 1:jmax, 0:kmax)
                              ! $ \hat{T} $ . 温度 (半整数レベル). 
                              ! Temperature (half level)
    real(DP), intent(in):: xyz_VirTemp (0:imax-1, 1:jmax, 1:kmax)
                              ! $ T_v $ .   仮温度. Virtual temperature
    real(DP), intent(in):: xyr_VirTemp (0:imax-1, 1:jmax, 0:kmax)
                              ! $ \hat{T}_v $ . 仮温度 (半整数レベル). 
                              ! Virtual temperature (half level)
    real(DP), intent(in):: xyz_Press  (0:imax-1, 1:jmax, 1:kmax)
                              ! $ p $ . 気圧 (整数レベル). 
                              ! Air pressure (full level)
    real(DP), intent(in):: xyr_Press  (0:imax-1, 1:jmax, 0:kmax)
                              ! $ \hat{p} $ . 気圧 (半整数レベル). 
                              ! Air pressure (half level)
    real(DP), intent(in):: xy_SurfHeight (0:imax-1,1:jmax)
                              ! $ z_s $ . 地表面高度. 
                              ! Surface height. 
    real(DP), intent(in):: xyz_Height (0:imax-1, 1:jmax, 1:kmax)
                              ! 高度 (整数レベル). 
                              ! Height (full level)
    real(DP), intent(in):: xyr_Height (0:imax-1, 1:jmax, 0:kmax)
                              ! 高度 (半整数レベル). 
                              ! Height (half level)
    real(DP), intent(in):: xyz_Exner (0:imax-1, 1:jmax, 1:kmax)
                              ! Exner 関数 (整数レベル). 
                              ! Exner function (full level)
    real(DP), intent(in):: xyr_Exner (0:imax-1, 1:jmax, 0:kmax)
                              ! Exner 関数 (半整数レベル). 
                              ! Exner function (half level)

    real(DP), intent(in):: xy_SurfMOLength(0:imax-1, 1:jmax)
                              ! 
                              ! Turbulent kinetic energy (m2 s-2)

    real(DP), intent(in):: xyz_TurKinEne(0:imax-1, 1:jmax, 1:kmax)
                              ! 
                              ! Turbulent kinetic energy (m2 s-2)
    real(DP), intent(in):: xy_SurfMomFluxX (0:imax-1, 1:jmax)
                              ! 
                              ! Eastward momentum flux at surface
    real(DP), intent(in):: xy_SurfMomFluxY (0:imax-1, 1:jmax)
                              ! 
                              ! Northward momentum flux at surface
    real(DP), intent(in):: xy_SurfHeatFlux (0:imax-1, 1:jmax)
    real(DP), intent(in):: xyf_SurfQMixFlux(0:imax-1, 1:jmax, 1:ncmax)

    real(DP), intent(out):: xyr_MomFluxX (0:imax-1, 1:jmax, 0:kmax)
                              ! 東西方向運動量フラックス. 
                              ! Eastward momentum flux
    real(DP), intent(out):: xyr_MomFluxY (0:imax-1, 1:jmax, 0:kmax)
                              ! 南北方向運動量フラックス. 
                              ! Northward momentum flux
    real(DP), intent(out):: xyr_HeatFlux (0:imax-1, 1:jmax, 0:kmax)
                              ! 熱フラックス. 
                              ! Heat flux
    real(DP), intent(out):: xyrf_QMixFlux(0:imax-1, 1:jmax, 0:kmax, 1:ncmax)
                              ! 質量フラックス. 
                              ! Mass flux of compositions
    real(DP), intent(out):: xyr_VelDiffCoef (0:imax-1, 1:jmax, 0:kmax)
                              ! 拡散係数：運動量. 
                              ! Diffusion coefficient: velocity
    real(DP), intent(out):: xyr_TempDiffCoef (0:imax-1, 1:jmax, 0:kmax)
                              ! 拡散係数：温度. 
                              ! Diffusion coefficient: temperature
    real(DP), intent(out):: xyr_QMixDiffCoef (0:imax-1, 1:jmax, 0:kmax)
                              ! 拡散係数：比湿. 
                              ! Diffusion coefficient: specific humidity
    real(DP), intent(out):: xyz_DTurKinEneDt (0:imax-1, 1:jmax, 1:kmax)
                              !
                              ! Tendency of turbulent kinetic energy

    ! 作業変数
    ! Work variables
    !
    integer :: IndexH2OLiq
    integer :: IndexH2OSol

    real(DP) :: z_U (1:kmax)
    real(DP) :: z_V (1:kmax)
    real(DP) :: z_QH2OVap(1:kmax)
    real(DP) :: z_QH2OLiq(1:kmax)
    real(DP) :: z_QH2OSol(1:kmax)
    real(DP) :: z_Temp (1:kmax)
    real(DP) :: r_Temp (0:kmax)
    real(DP) :: z_VirTemp (1:kmax)
    real(DP) :: r_VirTemp (0:kmax)
    real(DP) :: z_Press  (1:kmax)
    real(DP) :: r_Press  (0:kmax)
    real(DP) :: SurfHeight
    real(DP) :: z_Height (1:kmax)
    real(DP) :: r_Height (0:kmax)
    real(DP) :: z_Exner (1:kmax)
    real(DP) :: r_Exner (0:kmax)
    real(DP) :: z_PotTemp(1:kmax)
    real(DP) :: z_QCldWat(1:kmax)
    real(DP) :: z_QCldIce(1:kmax)
    real(DP) :: z_TurKinEne(1:kmax)
    real(DP) :: SurfMomFluxX
    real(DP) :: SurfMomFluxY
    real(DP) :: SurfMomFlux
    real(DP) :: SurfHeatFlux
    real(DP) :: SurfQVapFlux
    real(DP) :: r_MomFluxX (0:kmax)
    real(DP) :: r_MomFluxY (0:kmax)
    real(DP) :: r_HeatFlux (0:kmax)
    real(DP) :: rf_QMixFlux(0:kmax, 1:ncmax)
    real(DP) :: r_VelDiffCoef (0:kmax)
    real(DP) :: r_TempDiffCoef(0:kmax)
    real(DP) :: r_QMixDiffCoef(0:kmax)
    real(DP) :: z_DTurKinEneDt (1:kmax)
                              !
                              ! Tendency of turbulent kinetic energy

    real(DP) :: r_Rho(0:kmax)
    real(DP) :: SurfMOLengthInv

    real(DP) :: z_DelHeight   (1:kmax-1)
    real(DP) :: z_DelHeightInv(1:kmax)
    real(DP) :: r_DelHeightInv(1:kmax-1)

    real(DP) :: r_LowWeightFactF2H(1:kmax-1)
    real(DP) :: r_UppWeightFactF2H(1:kmax-1)
    real(DP) :: r_LowWeightFactH2F(1:kmax-1)
    real(DP) :: r_UppWeightFactH2F(1:kmax-1)

    real(DP) :: z_QKE (1:kmax)
    real(DP) :: z_TSq (1:kmax)
    real(DP) :: z_QSq (1:kmax)
    real(DP) :: z_Cov (1:kmax)
    real(DP) :: z_TSqA(1:kmax)
    real(DP) :: z_QSqA(1:kmax)
    real(DP) :: z_CovA(1:kmax)

    integer:: i               ! 経度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in longitude
    integer:: j               ! 緯度方向に回る DO ループ用作業変数
                              ! Work variables for DO loop in latitude
    integer:: n


    ! 実行文 ; Executable statement
    !

    ! 初期化確認
    ! Initialization check
    !
    if ( .not. vdiffusion_jma_my_wrap_inited ) then
      call MessageNotify( 'E', module_name, 'This module has not been initialized.' )
    end if


#ifdef JMAVDIFF
    ! 計算時間計測開始
    ! Start measurement of computation time
    !
    call TimesetClockStart( module_name )


    IndexH2OLiq = CompositionInqIndex( 'H2OLiq' )
    IndexH2OSol = CompositionInqIndex( 'H2OSol' )

    do j = 1, jmax
      do i = 0, imax-1

        z_U          = xyz_U          (i,j,:)
        z_V          = xyz_V          (i,j,:)
        z_QH2OVap    = xyzf_QMix      (i,j,:,IndexH2OVap)
        if ( IndexH2OLiq > 0 ) then
          z_QCldWat = xyzf_QMix      (i,j,:,IndexH2OLiq)
        else
          z_QCldWat = 0.0_DP
        end if
        if ( IndexH2OSol > 0 ) then
          z_QCldIce = xyzf_QMix      (i,j,:,IndexH2OSol)
        else
          z_QCldIce = 0.0_DP
        end if
        z_Temp       = xyz_Temp       (i,j,:)
        r_Temp       = xyr_Temp       (i,j,:)
        z_VirTemp    = xyz_VirTemp    (i,j,:)
        r_VirTemp    = xyr_VirTemp    (i,j,:)
        z_Press      = xyz_Press      (i,j,:)
        r_Press      = xyr_Press      (i,j,:)
        SurfHeight   = xy_SurfHeight  (i,j)
        z_Height     = xyz_Height     (i,j,:) - xyr_Height     (i,j,0)
        r_Height     = xyr_Height     (i,j,:) - xyr_Height     (i,j,0)
        z_Exner      = xyz_Exner      (i,j,:)
        r_Exner      = xyr_Exner      (i,j,:)
        z_TurKinEne  = xyz_TurKinEne  (i,j,:)

        r_Rho = r_Press / ( GasRDry * r_VirTemp )

        SurfMomFluxX = xy_SurfMomFluxX(i,j) / r_Rho(0)
        SurfMomFluxY = xy_SurfMomFluxY(i,j) / r_Rho(0)
        SurfHeatFlux = xy_SurfHeatFlux(i,j) / ( r_Rho(0) * CpDry )
        SurfQVapFlux = xyf_SurfQMixFlux(i,j,IndexH2OVap) / r_Rho(0)

        SurfMOLengthInv = 1.0_DP / xy_SurfMOLength(i,j)

        z_PotTemp = z_Temp / z_Exner

        SurfMomFlux = sqrt( SurfMomFluxX**2 + SurfMomFluxY**2 )

        call pbl_grid_set( z_Height, r_Height(1:kmax-1), z_DelHeight(1:kmax-1), z_DelHeightInv(1:kmax), r_DelHeightInv(1:kmax-1), r_LowWeightFactF2H(1:kmax-1), r_UppWeightFactF2H(1:kmax-1), r_LowWeightFactH2F(1:kmax-1), r_UppWeightFactH2F(1:kmax-1) )

!!$        if ( FlagFirst ) then
!!$          call pbl_mym_initialize_run(&
!!$            & ftl_surf_ex, fqw_surf_ex, uf, l_mo_inv, &
!!$            & u, v, pt, qv, qc, qci, prs, &
!!$            & z_f, dz_f, rdz_f, rdz_h, f2h_m, f2h_p, &
!!$            & qke, tsq, qsq, cov)
!!$          call pbl_mym_initialize_run(&
!!$            & r_HeatFlux(0), rf_QMixFlux(0,IndexH2OVap), & ! (in )
!!$            & SurfMomFlux, l_mo_inv,                     & ! (in )
!!$            & z_U, z_V, z_PotTemp, zf_QMix(:,IndexH2OVap), & ! (in )
!!$            & z_QCldWat, z_QCldIce, z_Press,               & ! (in )
!!$            & z_Height, z_DelHeight(1:kmax-1),                  & ! (in )
!!$            & z_DelHeightInv(1:kmax), r_DelHeightInv(1:kmax-1), & ! (in )
!!$            & r_LowWeightFactF2H(1:kmax-1), r_UppWeightFactF2H(1:kmax-1), & ! (in )
!!$            & qke, tsq, qsq, cov & ! (out)
!!$            & )
!!$          FlagFirst = .false.
!!$        end if


        z_QKE = z_TurKinEne * 2.0_DP
        z_TSq = 0.0_DP
        z_QSq = 0.0_DP
        z_Cov = 0.0_DP

        call pbl_mym_main_level25( SurfMomFluxX, SurfMomFluxY, SurfHeatFlux, SurfQVapFlux, SurfMomFlux, SurfMOLengthInv, r_Press(0), z_U, z_V, z_PotTemp, z_QH2OVap, z_QCldWat, z_QCldIce, z_Press, z_Exner, z_QKE, z_TSq, z_QSq, z_Cov, z_Height, z_DelHeight(1:kmax-1), z_DelHeightInv(1:kmax), r_DelHeightInv(1:kmax-1), r_LowWeightFactF2H(1:kmax-1), r_UppWeightFactF2H(1:kmax-1), r_LowWeightFactH2F(1:kmax-1), r_UppWeightFactH2F(1:kmax-1), r_VelDiffCoef(1:kmax), r_TempDiffCoef(1:kmax), z_DTurKinEneDt, z_TSqA, z_QSqA, z_CovA, r_MomFluxX(1:kmax), r_MomFluxY(1:kmax), r_HeatFlux(1:kmax), rf_QMixFlux(1:kmax,IndexH2OVap) )

        r_VelDiffCoef (0) = 0.0_DP
        r_TempDiffCoef(0) = 0.0_DP
        z_DTurKinEneDt = z_DTurKinEneDt / 2.0_DP
        r_MomFluxX(0)              = 0.0_DP
        r_MomFluxY(0)              = 0.0_DP
        r_HeatFlux(0)              = 0.0_DP
        rf_QMixFlux(0,IndexH2OVap) = 0.0_DP


        r_QMixDiffCoef = r_TempDiffCoef

        do n = 1, IndexH2OVap-1
          rf_QMixFlux(:,n) = 0.0_DP
        end do
        do n = IndexH2OVap+1, ncmax
          rf_QMixFlux(:,n) = 0.0_DP
        end do

        r_MomFluxX = r_Rho * r_MomFluxX
        r_MomFluxY = r_Rho * r_MomFluxY
        r_HeatFlux = r_Rho * CpDry * r_HeatFlux * r_Exner
        rf_QMixFlux(:,IndexH2OVap) = r_Rho * rf_QMixFlux(:,IndexH2OVap)


!!$        call VDiffusionMY251D(                               &
!!$          & z_U, z_V, zf_QMix,                               & ! (in)
!!$          & z_Temp, r_Temp, z_VirTemp, r_VirTemp, r_Press,   & ! (in)
!!$          & SurfHeight,                                      & ! (in)
!!$          & z_Height, r_Height, z_Exner, r_Exner,            & ! (in)
!!$          & z_TurKinEne,                                     & ! (in)
!!$          & SurfMomFluxX, SurfMomFluxY,                      & ! (in)
!!$          & r_MomFluxX, r_MomFluxY, r_HeatFlux, rf_QMixFlux, & ! (out)
!!$          & r_VelDiffCoef, r_TempDiffCoef, r_QMixDiffCoef,   & ! (out)
!!$          & z_DTurKinEneDt                                   & ! (out)
!!$          & )

        xyr_MomFluxX    (i,j,:)   = r_MomFluxX
        xyr_MomFluxY    (i,j,:)   = r_MomFluxY
        xyr_HeatFlux    (i,j,:)   = r_HeatFlux
        xyrf_QMixFlux   (i,j,:,:) = rf_QMixFlux
        xyr_VelDiffCoef (i,j,:)   = r_VelDiffCoef
        xyr_TempDiffCoef(i,j,:)   = r_TempDiffCoef
        xyr_QMixDiffCoef(i,j,:)   = r_QMixDiffCoef
        xyz_DTurKinEneDt(i,j,:)   = z_DTurKinEneDt

      end do
    end do

#else

    call MessageNotify( 'E', module_name, 'JMA MY library is not included.' )

#endif


    ! 拡散係数の出力
    ! Output diffusion coefficients
    !

    ! 拡散係数出力
    ! Diffusion coeffficients output
    !
!!$    call HistoryAutoPut( TimeN, 'VelDiffCoef',  xyr_VelDiffCoef  )
!!$    call HistoryAutoPut( TimeN, 'TempDiffCoef', xyr_TempDiffCoef )
!!$    call HistoryAutoPut( TimeN, 'QVapDiffCoef', xyr_QMixDiffCoef )
!!$
!!$    call HistoryAutoPut( TimeN, 'TKEPShear', xyz_TurKinEneProShear )
!!$    call HistoryAutoPut( TimeN, 'TKEPBuoy' , xyz_TurKinEneProBuoya )
!!$    call HistoryAutoPut( TimeN, 'TKEDiss'  , xyz_TurKinEneDiss     )
!!$
!!$    call HistoryAutoPut( TimeN, 'MixLength' , xyz_MixLength )



    ! 計算時間計測一時停止
    ! Pause measurement of computation time
    !
    call TimesetClockStop( module_name )

  end subroutine VDiffusionJMAMYWrapper3D

Private Instance methods

LevelNum

*Variable* :
`LevelNum` :	`integer, save`

module_name

Constant :

module_name = ‘vdiffusion_jma_my_wrapper‘ :

character(*), parameter

:	モジュールの名称. Module name

vdiffusion_jma_my_wrap_inited

Variable :

vdiffusion_jma_my_wrap_inited = .false. :

logical, save

:	初期設定フラグ. Initialization flag

version

Constant :

version = ’$Name: dcpam5-20150214 $’ // ’$Id: vdiffusion_jma_my_wrapper.F90,v 1.2 2015/02/11 11:53:55 yot Exp $’ :

character(*), parameter

:	モジュールのバージョン Module version